Category: Dutch Ovens

Replacement Vintage Revere Ware Pot/dutch Oven Handle Pair 2-screw

#ad
RevereWareParts.com SYNCHKG017300 #ad - Each order includes two handles, enough for one pot. Part notes the screws included with these handles are Phillips head, not slotted like the original Revere Ware pot handle screws were. Bakelite notes because bakelite is somewhat brittle, over tightening can cause the Bakelite to crack or the screw inserts to pull out.

Fits: vintage era pots and Dutch ovens. Measurements: 3. 33 in 85 mm long, 068 in 17 mm thick, holes are 1. 5 in 38 mm apart on center. If your pot handles look like these, they should fit. These are replacement handles for vintage era Revere Ware pots and Dutch ovens the ones with two screws per handle. Replaces: the original Revere part number for this replacement handle was 628.

Replacement Vintage Revere Ware Pot/dutch Oven Handle Pair 2-screw #ad - Includes new screws. These handles have a matte finish, not a glossy one like the other Bakelite parts we sell. In our experience, some original pot handles had a glossy finish and some had a matte finish. These handles are not oven-safe and repeated washing in a dishwasher will dull the surface of the Bakelite.

Installation notes when you screw these on, unscrew both screws a little, if the smaller piece seems to not be on quite all the way, wiggle the handle to seat the handle better, and screw the handle tight again.

More information about RevereWareParts.com SYNCHKG017300 #ad

Revere Replacement Lid Knob for Ware Lids single knob

#ad
RevereWareParts.com LK #ad - They also fit the Tri-Ply line. This package includes a single knob. Bakelite will be dulled by washing in a dishwasher. This knob may not fit Revere Ware lid styles that have a different looking knob. Material: bakelite, brass Includes: Bakelite knob with brass screw insert. Bakelite notes Over-tightening the knobs may cause the Bakelite to crack.

This listing is for a single knob only. These are replacement lid knobs for Revere Ware lids. Replaces: the part was called "Bakelite Cover Knob" and the original Revere number for this part was 2677. It was also referred to as part no. This is the screw insert from the old knob. Be gentle. 625. Fits: all revere ware lids, vintage era and newer that have a similar looking knob.

Revere Replacement Lid Knob for Ware Lids single knob #ad - They are also sold in pairs a different listing to help reduce shipping and handling costs. This knob does not come with a separate screw as all Revere Ware lids have a screw stud attached on them. These knobs are made for the copper bottom line of Revere Ware cookware. Bakelite is generally not oven safe. These parts are newly manufactured and are made to look and work just like original Revere Ware knob.

More information about RevereWareParts.com LK #ad


Similar products



Replacement Handle Pair for Revere Ware Pots/Dutch Ovens Single Screw

#ad
RevereWareParts.com POH-2 #ad - These handles are NOT made to be general replacement handles for any cookware piece. Please do not purchase them just to try them on a non Revere Ware pot and return them if they don't work. These are made to fit only 70's and newer pots and Dutch ovens made by Revere Ware that have a handle that looks the same.

Replacement knob for Revere Ware lids. They also fit the Tri-Ply line. This package includes a single knob. Replacement handle pair for Revere Ware pots / Dutch ovens with single screw handle two handles. Bakelite notes: because Bakelite is somewhat brittle, over tightening can cause the Bakelite to crack. Bakelite in general is not safe to expose to an open flame.

Replacement Handle Pair for Revere Ware Pots/Dutch Ovens Single Screw #ad - Measurements: Approximately 3. 0 in 75. 5 mm x 1. 25 32 mm x 1. 5 in in 38 mm fits: newer era pots and dutch ovens that use a single screw only, that screws at a 90 degree angle into a bracket on the side of the pot. Use caution when tightening. Use and care: these handles and Bakelite in general are not oven-safe and repeated washing in a dishwasher will dull the surface of the Bakelite.

Use care to not expose the handles to open flame buy turning a gas flame on too high as it will case the Bakelite to smoke and emit a bad odor, and possibly crack.

More information about RevereWareParts.com POH-2 #ad


Similar products



Medium 2-screw replacement handle for vintage Revere Ware pans

#ad
RevereWareParts.com SYNCHKG017226 #ad - These work with revere Ware pans with handles that have two screws through the Bakelite. Includes necessary hardware screws, nuts, washers hanging hook. They also fit the Tri-Ply line. This package includes a single knob. Material: bakelite, stainless steel Includes: Two handle halves + hardware set Measurements: 4.

6 in 117 mm long, 2. 6 in 66mm between holes on center. Please see description below for information on determining the proper size handle. The solution is either to add a washer or to grind the screw down slightly, about 1/6 of an inch. For a 3/8" spline height, you need the small handle. The most important thing is to not over tighten the screws when assembling the pan handle or you can crack the handle.

Medium 2-screw replacement handle for vintage Revere Ware pans #ad - Bakelite notes bakelite is a great heat resistant material, but it can be a bit brittle. This is just a natural variation in the original Revere manufacturing process. These are made to fit only 70's and newer pots and Dutch ovens made by Revere Ware that have a handle that looks the same. These knobs are made for the copper bottom line of Revere Ware cookware.

Installation notes we have seen about 5% of handles where the screw holes are off just enough to make it very hard to get the nuts to go all the way through. If you have a 3/4" spline you need the large or x-large size, not this one.

More information about RevereWareParts.com SYNCHKG017226 #ad


Similar products



Large 2-screw replacement handle for vintage Revere Ware pans

#ad
RevereWareParts.com VPAH-L #ad - Bakelite notes bakelite is a great heat resistant material, but it can be a bit brittle. They also fit the Tri-Ply line. This package includes a single knob. These fit revere Ware pans with handles that have two screws through the Bakelite. Includes necessary hardware screws, nuts, washers hanging hook. Includes necessary hardware screws, nuts, washers hanging hook.

Replacement handle pair for Revere Ware pots / Dutch ovens with single screw handle two handles. If you have a 3/4" spline and 3. 7" between the centers of the holes, you need the xtra large handle. These parts are new and are made to look and work just like original Revere Ware handles. For a 5/8" spline, and a 3/8" spline height, you need the medium handle, the small handle.

Large 2-screw replacement handle for vintage Revere Ware pans #ad - The is just a natural variation in the original Revere manufacturing process. Replacement knob for Revere Ware lids. These handles are NOT made to be general replacement handles for any cookware piece. Please do not purchase them just to try them on a non Revere Ware pot and return them if they don't work. Medium replacement handle for 2-screw style Revere Ware sauce pans and skillets.

More information about RevereWareParts.com VPAH-L #ad


Similar products



Replacement Lid Knobs for Revere Ware Lids two knobs

#ad
RevereWareParts.com SYNCHKG009240 #ad - These knobs are made for the copper bottom line of Revere Ware cookware. Please see description below for information on determining the proper size handle. This knob may not fit Revere Ware lid styles that have a different looking knob. Fits: all revere ware lids, vintage era and newer that have a similar looking knob.

Troubleshooting if you see something like an eraser head instead of a screw on your lid, try unscrewing it with pliers to expose the screw. Be gentle. Replacement handle pair for Revere Ware pots / Dutch ovens with single screw handle two handles. This knob does not come with a separate screw as all Revere Ware lids have a screw stud attached on them.

Replacement Lid Knobs for Revere Ware Lids two knobs #ad - If you want to use this knob with another type of lid that does not have a built in screw stud, you will need to purchase an 8/32 stainless or brass screw separately and cut it to the proper size. This package includes two knobs. This is the screw insert from the old knob. Includes necessary hardware screws, nuts, washers hanging hook.

These parts are newly manufactured and are made to look and work just like original Revere Ware knob. These are made to fit only 70's and newer pots and Dutch ovens made by Revere Ware that have a handle that looks the same. In this listing we sell the knobs in pairs to reduce the shipping cost per item.

More information about RevereWareParts.com SYNCHKG009240 #ad


Similar products



X-large 2-screw replacement handle for vintage Revere Ware pans

#ad
RevereWareParts.com SYNCHKG016235 #ad - Replacement handle pair for Revere Ware pots / Dutch ovens with single screw handle two handles. Includes necessary hardware screws, nuts, washers hanging hook. Please see description below for information on determining the proper size handle. Large replacement handle for 2-screw stile vintage Revere Ware sauce pans and skillets.

These parts are newly manufactured and are made to look and work just like original Revere Ware handles. How to fit: to determine the proper size handle make sure your sauce pan or skillet has a 3/4 inch tall metal spline, and has approximately 3. 7 inches between the centers of the screw holes. These knobs are made for the copper bottom line of Revere Ware cookware.

X-large 2-screw replacement handle for vintage Revere Ware pans #ad - A slight widening of the holes on the metal spline will allow the handles to fit. This package includes two knobs. X-large replacement handle for 2-screw style vintage Revere Ware sauce pans and skillets. Bakelite notes bakelite is a great heat resistant material, but it can be a bit brittle. These fit revere Ware pans with handles that have two screws through the Bakelite.

The is just a natural variation in the original Revere manufacturing process. These are x-large sized replacement handles for vintage era 2-screw Revere Ware pans.

More information about RevereWareParts.com SYNCHKG016235 #ad


Similar products



Large 1-screw Replacement Handle for Revere Ware Pans

#ad
RevereWareParts.com COMINHKR017629 #ad - Because the original slot head screws strip very easily, we consider this an improvement. Please see description below for information on determining the proper size handle. Please see description below for information on determining the proper size handle. Replacement knob for Revere Ware lids. This package includes two knobs.

X-large replacement handle for 2-screw style vintage Revere Ware sauce pans and skillets. These are large sized replacement handles for newer era Revere Ware pans. Installation notes to remove the rivet on the old handle, drill it out with a 5/32 drill bit. Hardware notes the screw in the hardware set is Phillips head, not slotted like some of the original Revere Ware screw sets were most of these handles were riveted, not screwed on.

Large 1-screw Replacement Handle for Revere Ware Pans #ad - It also had an older part number of the 4xx type that we have not been able to determine. Please use the measurements above to insure you choose a proper size. Includes necessary hardware screws, nuts, washers hanging hook. Measurements: 5. 6 in 142 mm long overall, 4. 8 in 122 mm long bakelite fits: newer style 2 quart and 3 quart sauce pans and similar handled steamer baskets, 8 inch skillets; both copper bottom and tri-ply aluminum core varieties, and possibly others.

Replaces: revere called this handle style "Style No.

More information about RevereWareParts.com COMINHKR017629 #ad


Similar products

metal