Category: Uncategorized

Top 10 Flaring Tool for Copper Tubing – Pipe Cutters

As an Amazon Associate I earn from qualifying purchases.

1. FORSUN

#ad

Flaring Tools Set Tubing Pipe 6 Dies Sizes 1/4-3/4inch 45 Degree Angle Eccentric Cone Type Kit with Copper Brass Aluminum Mild Steel for Water Gas Refrigeration Brake Line Applications

#ad
FORSUN #ad - Flaring tool kit suitable for soft materials such as copper and aluminum; Recommended by some mini split manufacturers for R-410A flare. A single clamp screw of flare tool provides for easy clamping and removal of tubing, Large feed screw handle for smooth turning with little effort.

Silver flaring bars are heat-treated for durability and secure grip on tubing. High standards of quality, strength and endurance in design of rigid flare tool. Tube flaring tool produces 45 Degree flares in soft copper, brass, aluminum and mild steel tubing. Pipe sizes for the flaring tool are 1/4", 3/8", 1/2", 5/16", 5/8", 3/4". Andflaring tool kit makes a good flare that fits properly on standard fittings with no leaks.
BrandFORSUN #ad
ManufacturerFORSUN #ad
Part NumberFORSUN-000221

2. HORUSDY

#ad

3/4" Refrigeration HVAC 45 degree Heavy Duty Eccentric Cone Type Kit, HORUSDY 7 Dies Flaring Tools Set For Sizes 3/16"

#ad
HORUSDY #ad - Recommended for soft materials such as copper and aluminum. A single clamp screw provides for easy clamping and removal of tubing, Large feed screw handle for smooth turning with little effort. Silver flaring bars are heat-treated for durability and secure grip on tubing. Produces 45 degree flares in soft copper, brass, aluminum and mild steel tubing. Pipe sizes for the flaring tool are 3/16", 1/2", 1/4", 3/8", 5/16", 5/8", 3/4".
BrandHORUSDY #ad
ManufacturerHORUSDY #ad
Height4 Inches
Length8 Inches
Width6 Inches
Part Number97771

3. Ridgid

#ad

Pipe Flaring Tool for 45-degree flares, RIDGID 23332 345 Flaring Tool

#ad
Ridgid #ad - Produces 45-degree flares in soft copper, brass, aluminum and mild steel tubing. Hardened, smooth flaring cone provides fast, 45-degree flares either single or double lap. Ridgid covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool. 45-degree sae flares in 3/16-inch, 7/16-inch, 5/16-inch, 1/4-inch, 1/2-inch, 3/8-inch, and 5/8-inch sizes. A single clamp screw allows easy clamping and removal of tubing.
BrandRidgid #ad
ManufacturerRidgid #ad
Height2.5 Inches
Length10 Inches
Weight2.65 Pounds
Width5.1 Inches
Part Number23332
Model23332
WarrantyRidgid covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool

4. LSR LORESO

#ad

3 In 1 Copper Bender for 1/4" 5/16" 3/8" Tubing Bending Tools- Manual Tubing Bender for Copper, LORESO Tube Bender, Aluminum and Thin Steel Pipes, Brass, Tubing Bender 0-180 Degrees Pipe Bender

#ad
LSR LORESO #ad - Versatile pipe bender for all industries – this copper pipe bender is suitable for use on construction sites, plumbing jobs, manufacturing, heating, shipping, decorating or even at garage repair shops. Sturdy cast iron frame – our copper tube bender is made from strong, durable cast iron and can be mounted on either a bench or frame – the safest way to bend tubes, conduit and pipes quickly and effectively.

Various degrees available – simply adjust the metal bender according to the angle you require from 0-180 degrees. Manual tubing and pipe bender – manufactured with high-quality, this tube bender will efficiently bend copper, aluminum and thin steel pipes.

This pipe bender is a 3 in 1 tool and will fit 1/4”, 6, 3/8” 8, 5/16”, 10mm tubing. Made with high precision and premium machining quality, it is a robust tool that is built to last. This pipe bender provides a fast, heavy duty steel, brass, economical way to produce angled bends in round tubing. Easy to operate – the loreso manual pipe bender is easy to operate and portable so you can take it from site to site.
BrandLSR LORESO #ad
ManufacturerLoreso #ad

5. Migrare

#ad

3/4 Bits, 3/8, FSPIN300 Flaring Tool Drill Bit Set With 1/4, 1/2, 5/8

#ad
Migrare #ad - Fspin300 flaring tool drill bit set with 1/4’’ 3/8’’ 1/2’’ 5/8’’ 3/4" Bits. Right flaring size, every single time up to 10x faster than the conventional tools: flares in 5 seconds! Preserves copper/aluminum malleability while doing the flaring, avoiding cracks and leakages. Revolutionizing system for molding tubes using heat by friction Way more surface of contact between the flare and the valve. 5 pieces set with the most common HVAC tubing diameters.
BrandMigrare #ad
ManufacturerMigrare #ad
Height6 Inches
Length6 Inches
Width6 Inches
Part NumberFSPIN300
ModelTRTAZ11A

6. Miss House

#ad

Air Conditioner Copper Tube Expander Swaging Tool with 7/8'', 6Pcs HVAC Tools, 1/2'', Swaging Tool Drill Bit Set, 3/4'', 3/8'', 5/8'', 1/4'' Bits, Multifunction Copper Pipe Flaring Tool

#ad
Miss House #ad - To be installed in manual electric drill. Multi size: 6 different sizes per set of your choice to meet your needs. Perfect forging depth: a full range of forging tools makes it easy to expand HVAC tubing, the forging plug will provide a large exchange depth for a perfect fit.

Function and easy to install: when the air conditioner is installed, make two mutual copper tubes. Ideal for installers, expand the copper tube, it doesn't matter if you are learning or have been doing it. Material: made of bearing steel. Precision: the flares will always have the same size and will fit perfectly; The swages present a perfect depth and a tight fitting, that will make the brazing easier, reducing the fatigue stress over the coupling area. It has high and uniform hardness and wear resistance, and high elastic limit, your good helper for work and life.
BrandMiss House #ad
ManufacturerMiss House #ad
Part NumberGPONUH99531

7. YIHOME

#ad

1/2", Multifunction Copper Pipe Flaring Tool Portable Bearing Steel Drill Bit Expander, 7/8", 5/8", 3/4", 6pcs Swaging Tool Drill Bit Set, 1/4", 3/8"

#ad
YIHOME #ad - It has high and uniform hardness and wear resistance, and high elastic limit. To be installed on hand electric drill. Material: made of bearing steel. Multi size: 7/8", 1/4", 5/8", 1/2", 3/8", 3/4", 6 different sizes per set of your choice to meet your needs. Swaging tool: a product of the swaging process with this tool making their way into HVAC systems lineset. Function: when air conditioning is installed, expand copper tube, make two copper tube mutual link. Easy to install: perfect for installers, no matter if you are just learning or have been doing it.
BrandYIHOME #ad
ManufacturerYIHOME #ad
Height1.18 Inches
Length5.91 Inches
Width3.94 Inches
Part Number23366963500

8. VSOON

#ad

Flaring Tools Kit Eccenteic 45-Degree Cone Tubing Flaring Tool Set Includes Tube Cutter Deburring tool HVAC Refrigeration Tools for Copper Pipe Flaring 1/4-3/4 Inch O.D.Tubing By VSOON

#ad
VSOON #ad - What you getflaring tool, tube cutter, Deburring Tool. Make your repair & flaring work more efficient! specification 1/4", 1/2", 5/16"8mm, 10mm, 12mm, 3/8", 5/8" 16mm, 6mm, 3/4"19mm O.

D. Highly recommended for joints on high pressure systems R410A. Eccenteic flaring tooleccenteic cone type flaring tool with an eccentric flaring cone providing a smooth finish on all flares. The stopper plate provide positive clamping action with minimum distortion. Accurate tube flaringheavy duty wide-range bar type flaring tool. Tubing eccentric flaring tool kit. Easy to userobust and durable. Convenient flaring and exact flaring result. Using the updated structure for brass pipe flaring. Eccentric cone will rebound by itself after the work is finished.
BrandVSOON #ad
ManufacturerVSOON #ad

9. Flexzion

#ad

Flexzion Flaring Tools Set Tubing Pipe 8 Dies Sizes 3/16-3/4inch 45 Degree Angle Eccentric Cone Type Kit with Copper Brass Aluminum Mild Steel for Water Gas Refrigeration Brake Line Applications

#ad
Flexzion #ad - Recommended for soft materials such as copper and aluminum; Recommended by some mini split manufacturers for R-410A flare. Produces 45 degree flares in soft copper, brass, aluminum and mild steel tubing. Pipe sizes for the flaring tool are 3/16", 5/8", 7/16", 3/8", 1/2", 1/4", 5/16", 3/4". A single clamp screw provides for easy clamping and removal of tubing, Large feed screw handle for smooth turning with little effort. Silver flaring bars are heat-treated for durability and secure grip on tubing.
BrandFlexzion #ad
ManufacturerFlexzion #ad
Height4 Inches
Length8 Inches
Weight3.28 Pounds
Width6 Inches
Part NumberRCT_FLRN_TOL_N808A

10. KOLODOGO

#ad

Heavy Duty Steel Swage Tool Set for Copper Plastic Aluminum Stainless Steel Pipe With Tubing Cutter, Tubing Bender & Ratchet Wrench, Tubing Flaring Swage Tool Kit

#ad
KOLODOGO #ad - Easy to use:the screw of the pipe cutters provide easy control of cutting pressure for clean cuts. Flare groove rollers make rotation simple and prevent skipping and jumping while cutting. Double flaring tool kit:this flaring tool kit is an tool for pipe flaring, and it can be used to make single or double flares on copper, brass and thin walled aluminum tubes.

High quality steel material ensures strong strength and long durability. Material:aluminum alloy steel cutter body, surface plating. Bending 0-180 degree copper, and thin stainless steel pipes in the air conditioner installation and vehicle repair.

Tubing cutter: suitable for cutting pipe diameter between 3-28mm1/8-inch to 1-1/8 Inch for Pipe Copper PVC Thin Stainless Steel Tube. All of these tools are packed in a carry case for easy storage and transportation. 3 in 1 pipe bender: three sizes of tubing 1/4", brass, aluminum, 5/16" and 3/8". Note: the picture is for reference only, the actual product shall prevail.
BrandKOLODOGO #ad
ManufacturerShinequ-US #ad
Part Numbergj-9

metal