As an Amazon Associate I earn from qualifying purchases.
1. Craftsman #ad
CRAFTSMAN 10-Inch Miter Saw Blade, Combo Pack CMAS210CMB #adCraftsman #ad
- Heat-treated plate eliminates warping. Corrosion resistant coating designed to prevent rust. Induction-brazed Carbide tips for durability and long life. Precision ground teeth for smooth, accurate cuts.
2. DEWALT #ad
DEWALT 10-Inch Miter / Table Saw Blades, Combo Pack DW3106P5,Metallic, 60-Tooth Crosscutting & 32-Tooth General Purpose #adDEWALT #ad
- Durable tungsten carbide maintains a true edge. Thin kerf for fast and smooth cutting action and The arbor size is 5/8”. Tougher tungsten carbide stays sharper longer.
Computer-balanced plate reduces vibration for improved accuracy and better finish. Best used for miter saw and slide miter saw jobs.
3. Makita #ad
Makita A-93681 10-Inch 80 Tooth Micro Polished Mitersaw Blade #adMakita #ad
- Fine Crosscutting. Ultra thin kerf. 091", 5 degree Hook Angle, and. 071 plate Thickness. Micro-grain carbide teeth are Honed with up to 600 Grit for a Mirror Finish. Ideal for: harwood, Softwood, and Plywood. Fully hardened and expertly Hand Tensioned Steel Saw Plates for True Cuts.
|Warranty||1 Year, 30 Day|
4. Freud #ad
Freud 10" x 60T Thin Kerf Sliding Compound Miter Saw Blade LU91R010 #adFreud #ad
- Negative hook Angles minimizes climbing for better control. Perma-shield non-stick Coating reduces blade drag, protects the blade from corrosion and pitch build-up.
Thin kerf requires less power and allows for faster feed rate. 10" blade diameter, 5/8" arbor, atb grind, 60 teeth, .090" kerf, -5° Hook Angle. Premium tico hi-density Carbide Crosscutting Blend for Maximum Performance.
5. Makita #ad
Makita B-66977 10" 80T Carbide-Tipped Max Efficiency Miter Saw Blade #adMakita #ad
- Up to 30% more cuts per charge compared to standard blades. Up to 100% faster cutting compared to standard blades. Specially engineered teeth assist to reduce the load put on the tool while cutting.
Thin kerf carbide-tipped design provides smoother cuts with less drag on the motor and minimal material loss. Special atafr alternate top alternate face w/ raker Carbide tips provide smoother and faster cuts.
6. CMT #ad
CMT 253.060.10 ITK Industrial Finish Sliding Compound Miter Saw Blade, 10-Inch x 60 Teeth 1FTG+2ATB Grind with 5/8-Inch Bore #adCMT #ad
- Micrograin carbide for long-lasting cutting performance and smooth cut on wood/wood products. To be used on compound miter saws for cutting soft/hardwood, plywood and two-sided laminates.
Glass-smooth finish on your miter cuts. 0098 kerf thickness, 0071 plate thickness, 7° hook angle, 1 Flat + 2/15° alternate teeth Grind. Laser-cut plate features expansion slots to reduce noise and anti-vibration design. For fine finish crosscuts.
|Warranty||CMT carbide and carbide-tipped router bits and saw blades are designed, engineered and manufactured to uncomprimising standards for optimum cutting performance and maximum service life. If for any reason you are not satisfied with the performance of your CMT router bits, and the bits were used for their recommended applications, you can return them to CMT for a full replacement. Warranty excludes dull, misused, damaged, and/or resharpened bits. CMT is not liable for damages to goods, property or persons, due to improper installation or misapplication of equipment.|
7. COMOWARE #ad
Laminate, ATB Premium Tip, Plywood & Hardwoods, COMOWARE Circular Miter Saw Blade- 10 inch 80 Tooth, Anti-Vibration, 5/8 inch Arbor Light Contractor and DIY General Purpose Finishing for Wood #adCOMOWARE #ad
- Use guide: the equipment should be equipped with the safety protection device. Larger spacing between the teeth is more convenient for chip removal and heat dissipation. Widely use: the 10" saw blade has a 5/8" diamond arbor which fits into both round and diamond hole blade machine and maintains the stability when in use.
Unique design: premium tip, anti-vibration design, large teeth. Excellent atb style: the atb style which adds the cutting speed and durability.
The large tooth design allows the blade to be safely sharpened more times. This helps maximize both the accuracy of the cut and the efficiency of your work, so you can enjoy a job well done and the ability to complete more tasks in less time.
High quality carbide material: provide the best cutting experience, with good cutting performance. Prolong the service life of Saw Blade, and add the sharpness. When not in use, hang the saw blade away from the damp place to prevent rust. General purpose finishing and the 80 teeth tip is made of VC1 tungsten carbide which adds the saw blade's sharpness and provide extended life of saw blade.
8. Luckyway #ad
Luckyway 2-Pack 10 Inch Miter / Table Saw Blades 32T&60T with 5/8 Inch Arbor TCT Circular Saw Blade for Cutting Wood #adLuckyway #ad
- Tungsten carbide teeth provide excellent wear and heat resistance. Application - ideal for cross-cutting softwood, hardwood, chipboard, plated&counted-plated panels, multi-board, panels, plywood, MDF, laminated&Bi-laminate plastic, and FRP.
Features - incorporates an atb alternating top bevel offset tooth design, cleanly cutting the wood fibers before the following teeth remove the chip.
Material - fully hardened steel blade body – delivers accuracy and resists bending and deflection for true cuts. This provides for a much smoother cut, The angle of the tooth scores the surface of the wood in advance of the cut, with much less chance of splintering the surface of the wood.
Providing a high degree of finish edge. The positive cutting angle which provides fast and efficient removal of chips and swarf. The blades also can rip cut along the grain. Dimensions - includes 1pc 10*5/8*32t & 1pc 10*5/8*60T TCT circular saw blade.
9. WEN #ad
WEN BL1060 10-Inch 60-Tooth Fine-Finish Professional Woodworking Saw Blade for Miter Saws and Table Saws #adWEN #ad
- Compatible with the majority of 10-inch miter saws, jobsite saws, and table saws. Featuring a 10-inch diameter 254 mm, a 5/8-inch arbor 15. 88 mm and a rating of up to 6000 RPM.
Ultra-thin 1/10-inch kerf 2. 4 mm provides clean and efficient cuts. Designed with 60 carbide-tipped teeth for fine-finish wood cutting. Perfect for slicing through both hard and softwoods of all kinds.
10. Irwin Tools #ad
Classic Series, IRWIN 10-Inch Miter Saw Blade, Steel Table 11870 #adIrwin Tools #ad
- Precision-ground circular saw teeth for smooth, accurate cuts. 10" blade length with 5/8" arbor and 009" kerf. Fully-hardened circular saw blade plate runs truer, longer. Precision-ground circular saw teeth for smooth, accurate cuts. 180 teeth count with top/face grind.
10" blade length with 5/8" arbor and 009" kerf. Fully-hardened circular saw blade plate runs truer, longer. 180 teeth count with top/face grind. Heavy-gauge, high-carbon steel construction provides extended circular saw blade life. Heavy-gauge, high-carbon steel construction provides extended circular saw blade life.
|Brand||Irwin Tools #ad|