1. REED
#ad
1-1/4 to 4-Inch, Reed Tool DEB4 Deburring Tool for Plastic
#adREED #ad - Creates a smooth pipe end so solvent spreads evenly as pipe is joined. One easy revolution of the deb4 Deburring Tool produces a 3/32-Inch 15-Degree chamfer in seconds.More information #ad
Reversible, sharpenable, hardened steel blade for two cutting edges. Deburrs six pipe sizes: 1 1/4-Inch - 4-Inch. Equivalent to rIGID part # 74.Brand | REED #ad |
Manufacturer | Standard Plumbing Supply #ad |
Height | 1.75 Inches |
Length | 5 Inches |
Weight | 0.7 Pounds |
Width | 8 Inches |
Part Number | DEB4 |
Model | DEB4 |
More information #ad
2. Armour Line
#ad
1/8 in To 1-5/8 in Diameter, Pack of 1, Armour Line RP77271 Pipe And Tubing Reamer
#adArmour Line #ad - Removes burrs on tubing 1/8 in. Also bevels end of the tubing. To 1 5/8 in. In diameter. For use on pvC pipe and copper tubing only. Long wearing steel blades. Grooved durable hard plastic body for better grip. Prepares tubing for soldering, removing sharp, edges.More information #ad
Brand | Armour Line #ad |
Manufacturer | Prime-Line #ad |
Height | 5.71 Inches |
Length | 1.89 Inches |
Weight | 0.15 Pounds |
Width | 4.13 Inches |
Part Number | RP77271 |
Model | RP77271 |
More information #ad
3. Reed Tool
#ad
Reed Tool PPR150 Clean Ream Extreme with 3/8-Inch Hex Shaft, 1-½-Inch Head
#adReed Tool #ad - For 1, 000 reams. Can be turned 90 degrees for new faces before replacement. Reams 1 ½” sch. Fabricated aluminum body with hex-shaped, low carbon steel shaft. Carbide insert provides the cutting surface. 40 pvc, cpvc & ABS fittings.More information #ad
Brand | Reed Tool #ad |
Manufacturer | Standard Plumbing Supply #ad |
Height | 3 Inches |
Length | 1.5 Inches |
Weight | 0.25 Pounds |
Width | 1.5 Inches |
Part Number | PPR150 |
Model | PPR150 |
More information #ad
4. KOLODOGO
#ad
3/16" to 1-1/2" PVC Pipe Reamer, Tubing Chamfer Tool,Burr Remover for PVC Tubing, Inner-Outer Reamer
#adKOLODOGO #ad - Quick flaring tool kit:sharp alloy steel blade, aluminum, can quickly and precisely cut copper, U type design, brass and plastic tubing, thin wall tubing. Rotate thread switch can adjust the cutting wheel forward and backward.More information #ad
Size:suitable for cutting pipe diameter between 3-22mm/3-35mm. Material:alloy steel cutter body, surface plating. Easy to use:the screw of the pipe cutters provide easy control of cutting pressure for clean cuts. Clean tube cutter:flare groove rollers make rotation simple and prevent skipping and jumping while cutting.Brand | KOLODOGO #ad |
Manufacturer | Shinequ-US #ad |
Part Number | tc-9 |
More information #ad
5. Ridgid
#ad
1/2-inch to 2-inch Inner/Outer Reamer, RIDGID 29993 227S Stainless Steel Pipe Reamer Tool
#adRidgid #ad - Hardened steel construction for maximum durability; dual inch and metric measurement bar for ease of use. Pipe reamer has a 1/2-inch to 2-inch 12 mm to 50 mm outside diameter capacity. 45 cutting edges on the interior cone allow for fast, clean inner reaming and outer deburring and beveling of tubes.More information #ad
Ideal for reaming on stainless steel and copper tubing. Ridgid covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool.Brand | Ridgid #ad |
Manufacturer | Ridgid #ad |
Height | 3.94 Inches |
Length | 3.94 Inches |
Weight | 1.5 Pounds |
Width | 3.94 Inches |
Part Number | 29993 |
Model | 29993 |
Warranty | Ridgid covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool |
More information #ad
6. REED
#ad
Reed Tool PPR200 Clean Ream Extreme with 3/8-Inch Hex Shaft, 2-Inch Head
#adREED #ad - Reams 2-inch sch. Can be used with standard drills, cordless drills, or impact drills. Feature a 4-sided carbide insert which provides an extra cutting edge after 180-Degree cutting insert rotation.More information #ad
Ppr fitting reamers are NOT recommended for use on pressurized systems. 40 pvc, cpvc and ABS Fittings. Works great for vent lines, drain lines, water lines.Brand | REED #ad |
Manufacturer | Standard Plumbing Supply #ad |
Height | 3 Inches |
Length | 2 Inches |
Weight | 0.3 Pounds |
Width | 2 Inches |
Part Number | PPR200 |
Model | PPR200 |
More information #ad
7. Ridgid
#ad
RIDGID 34965 127 Inner-Outer Reamer, 1/4-inch to 1-1/2-inch Pipe Reamer
#adRidgid #ad - Delivers quick, clean and easy inside diameter reaming and outside diameter beveling of tubes. Pipe reamer has a 1/4-inch to 1-1/2-inch 6 mm to 40 mm outside diameter capacity. Sturdy plastic construction with long-wearing alloy steel blades for extended tool life.More information #ad
Ideal for reaming on copper, aluminum, brass and soft steel tubing. Ridgid covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool.Brand | Ridgid #ad |
Manufacturer | Ridgid #ad |
Height | 3.94 Inches |
Length | 3.94 Inches |
Weight | 0.2 Pounds |
Width | 3.94 Inches |
Part Number | 34965 |
Model | 127 |
Warranty | Ridgid covers its products with a lifetime warranty against defects in material or workmanship for the life of the tool. |
More information #ad
8. TIPU
#ad
TIPU 1-3/8" Inner-Outer Reamer, Tubing Chamfer Tool, Blue, PVC Pipe Deburring Tool, 3/16" to 1-3/8" PVC Pipe Reamer, Burr Remover for PVC Tubing
#adTIPU #ad - Blade material: Hardened Steel. This inner-outer reamers can be used for home use, plumbing applications or as a machinist tool in the shop. Ideal for reaming inside and outside diameters of plastic pipe, polycarbonate tubing, PE pipe, PVC pipe, PPR pipe.More information #ad
Features 3-cutting edges. Cutting edges on interior cone allow for fast clean inner reaming and outer deburring.Brand | TIPU #ad |
Manufacturer | TIPU #ad |
Weight | 0.08 Pounds |
Part Number | M 11 |
More information #ad
9. SharkBite
#ad
PEX, SharkBite U702A Deburring Pipe and Depth Gauge Tool, HDPE, Copper, CPVC, PE-RT, 1/4 Inch-1 Inch Sizes
#adSharkBite #ad - Installs in seconds: sharkbite fittings requires no special tools, no soldering, no crimping or glue. Sharkbite is the only push-to-connect brand than can ensure a clean, leak-free connection.Just push to create a watertight seal. Versatilty: sharkbite connects copper, PEX, CPVC, and PE-RT Pipe in any combination. Residential and commercial: all sharkbite fittings meet the same standards for commercial and residential plumbing applications.
More information #ad
Quality: only sharkbite's quality and performance is field-proven with more than 550 million connections. Performance: rated to 200 psi and 200 Degrees F. Use in potable water and hydronic heating applications.Brand | SharkBite #ad |
Manufacturer | Cash Acme #ad |
Height | 1.33 Inches |
Length | 5 Inches |
Weight | 0.1 Pounds |
Width | 8.25 Inches |
Part Number | U702A |
Model | U702A |
Warranty | Lifetime |
More information #ad
10. REED
#ad
4-Piece with Case, Reed Tool PPRK4 Plastic Pipe Reamer Kit
#adREED #ad - Kit with ppr150, ppr300, ppr200, ppr400 sizes in a hard plastic case. Feature a 4-sided carbide insert which provides an extra cutting edge after 180-degree cutting insert rotation.More information #ad
Works great for vent lines, drain lines, water lines. Ppr fitting reamers are not recommended for use on pressurized systems. Can be used with standard drills, cordless drills, or impact drills.Brand | REED #ad |
Manufacturer | Standard Plumbing Supply #ad |
Height | 5 Inches |
Length | 15 Inches |
Weight | 7.6 Pounds |
Width | 10 Inches |
Part Number | PPRK4 |
Model | PPRK4 |
More information #ad