Category: Uncategorized

Top 10 Speed Squares For Woodworking – Carpentry Squares

As an Amazon Associate I earn from qualifying purchases.

1. Swanson Tool Co., Inc

#ad

Swanson Tool Co SW1201K Value Pack 7 inch Speed Square and Big 12 Speed Square without layout bar ships with Blue Book

#ad
Swanson Tool Co., Inc #ad - Get more bang for your buck with this value pack of two of our best selling speed squares. Heavy-gauge billet aluminum alloy construction is die-cast for increased accuracy versus laser-etched and extruded stamped rafter squares. Useful for determining and marking angles and making square cuts on boards. Gradations included for marking common, Valley, hip, and jack rafters. High-visibility, black gradations with a non-glare, matte finish for easy reading in any lighting conditions. When used as a saw guide, the speed square makes truing up a board easy.
BrandSwanson Tool Co., Inc #ad
ManufacturerSwanson Tool Company, Inc #ad
Height1 Inches
Length12 Inches
Width12 Inches
Part NumberSW1201K
ModelSW1201K

2. WORKPRO

#ad

WORKPRO Rafter Square and Combination Square Tool Set, 7 IN. Aluminum Alloy Die-casting Carpenter Square and 12 Inch Zinc-alloy Die-casting Square Ruler Combo Rafter Square Layout Tool

#ad
WORKPRO #ad - The spring screw of the combination square makes you easier to detach the stainless steel ruler and smooth ruler is easier to slide for your measurement. User-friendly - lipped fence allows you to easily brace the rafter square flush with the wood, creating a straight or angled line that is proportionate to the wood's edge.

The combination ruler itself is die-cast from zinc alloy and carries a steel ruler made of stainless steel with a matte finish. The stainless steel ruler of combination square has deep etching scale for superior legibility and long-lasting usage. They both work accurately at an angle 90 degree or 45 degrees. Durable material - the rafter square is die-cast from heavy-gauge aluminum alloy which enable it to last long and still give accurate measurement. Wide versatility - easy-to-read level vial and a metal scriber on the side of the combination ruler increase product practicality and versatility.

It has permanent deep markings and white graduations for max Readability any lighting. Clearly identifiable scale - the rafter square finishing features low glare and protective powder coated. Multiple graduation - 7-inch rafter square has many kinds of graduation which blends the features of framing square, try square, and protractor square. The combination square has a 12-inch stainless steel ruler which has 3 types of minimum scale value: 1/16”, miter square, 1/32” and 1mm.
BrandWORKPRO #ad
ManufacturerHANZGHOU GREATSTAR INDUSTRIAL CO.LTD #ad
Height1.97 Inches
Length13.98 Inches
Width5.71 Inches

3. Mr. Pen

#ad

2 Pack, Mr. Pen Metal 7 Inches Rafter Square, Carpenter Square

#ad
Mr. Pen #ad - Set of 2 rafter Square 7 Inch. Made from rust-proof And Weather-Resistant Aluminum Alloy. Precise and plain graduation, Perfect For Roofers, Builders, And Carpenters. Multi-purpose square tool: marking square And 45-Degree Lines, Protractor Saw Guide, Finding Roof Pitch, Etc.
BrandMr. Pen #ad
ManufacturerMr. Pen #ad
Part Number..
Model.

4. IRWIN

#ad

Blue , IRWIN Tools Rafter Square, Hi-Contrast Aluminum, 7-Inch 1794463

#ad
IRWIN #ad - This professional tool has permanent deep stampings are durable. Features rafter tables, brace and octagon scales and Essex board measure. Yellow markings on blue background are easiest to read. The square has multiple scales: 1/8-, 1/10-, 1/12-, and 1/16-inch. The aluminum body is rust-proof and weather-resistant.
BrandIRWIN #ad
ManufacturerIRWIN #ad
Height0.98 Inches
Length9.25 Inches
Weight0 Pounds
Width7.48 Inches
Part Number1794463
Model1794463

5. Swanson Tool Co., Inc

#ad

Made of High Impact Polystyrene, Orange, Swanson Tool Co T0118 Composite Speedlite Square Layout Tool

#ad
Swanson Tool Co., Inc #ad - 1/8-inch spaced notches to use for scribing lines. 8-inch size is great for siding. Beveled edge for ease of reading. Center line c/L guide for locating center of round stock. Constructed of lightweight high-impact structural composite material.
BrandSwanson Tool Co., Inc #ad
ManufacturerSwanson Tool #ad
Height1 Inches
Length32 Inches
Weight0.2 Pounds
Width8 Inches
Part NumberT0118
ModelT0118
WarrantySwanson Tool Co., Inc. warrants all products to be free from defects in material and workmanship. Swanson's only obligation under this warranty shall be at their option to repair, replace or refund the purchase price for any product determined by Swanson to be defective. This warranty is void on any product that has been tampered with, misused, abused, improperly maintained or altered in any matter. This warranty is made in lieu of all warranties expressed or implied including but not limited to the implied warranties of merchantability and fitness for purpose. No deviations from this limited warranty are authorized

6. IRWIN

#ad

1794469, Irwin Tools Combination Square, Metal-Body, 12"

#ad
IRWIN #ad - Black precision-etched scales. Can be used as a gauge for transferring measurements. Rust proof stainless steel blade. Perfect for 90° and 45° marking. Durable cast zinc body.
BrandIRWIN #ad
ManufacturerIRWIN #ad
Height0.79 Inches
Length5.51 Inches
Weight1.11 Pounds
Width12.4 Inches
Part Number1794469
Model1794469

7. Mr. Pen

#ad

Carpentry Squares, Metal Square Ruler, Square Angle Tool, Carpenter Square, Metal Square, Aluminum Rafter Square, 7 Inch, Mr. Pen- Rafter Square, Square Tool, Woodworking Square, Carpenters Square

#ad
Mr. Pen #ad - High-visibility, white gradations with A Non-Glare, Matte Finish For Easy Reading In Any Lighting Conditions. Heavy-gauge billet aluminum alloy construction Is Die-Cast For Increased Accuracy Over Laser-Etched And Extruded Stamped Rafter Squares. 7 inch triangle Square Fits In A Pocket. Gradations included for marking common, valley, hip, And Jack Rafters; Useful For Determining And Marking Angles And Making Square Cuts On Boards. Multi-purpose square tool: marking square And 45-Degree Lines, Protractor Saw Guide, Finding Roof Pitch, Etc.
BrandMr. Pen #ad
ManufacturerMr. Pen #ad
Part NumberCR01

8. Deartisan

#ad

Carpenter Square, 7-inch Aluminum Square+ 2Pcs Woodworking pen Rafter Carpenter Triangle Square Pressional Easy-Read Layout Tool framing square Aluminum

#ad
Deartisan #ad - Scribing - the square includes multiple notch marks so scribing is simple, and ripping stock is easy and accurate. We believe that this tool will help you a lot. Free gifts with 2 High quality woodworking pencil. Design from the United States. Constructed of aluminum alloy, 7-Inch square, fits in pocket. Guaranteeone month return for no reason and 8 Month free replacement. We have integrated many functions into this carpentry ruler, tri square, mitre square, for example framing square, and protractor square.
BrandDeartisan #ad
ManufacturerDeartisan #ad

9. Johnson Level & Tool

#ad

Johnson Level & Tool 1904-0700 7-Inch Johnny Square, Professional Easy-Read Aluminum Rafter Square w/out Manual

#ad
Johnson Level & Tool #ad - The etched protractor scale can be used directly with the saw against the square for cross or angled cuts. Simplify stair layout: the johnny square’s integrated distance and angle scales let you quickly and accurately mark your cut lines on your stringers and, this rafter square has scales for cutting hip, of course, valley and jack rafters.

Additional features: permanent graduations with easy-to-read numbers, 2x4 board dimension markers for measuring 1-1/2”, continuous scribing notches – ideal for ripping at 3-1/2” and 5-1/2”, 3” and 3-1/2”, low-glare protective powder coated finish.

Scribing notches can be used indirectly to create a saw cut line for rip cuts. Builders and contractors: thick edge is useful as a saw guide. Accuracy and durability: this aluminum rafter angle square boasts a solid aluminum body with CNC machined edges for greater accuracy and durability for any job or worksite.
BrandJohnson Level & Tool #ad
ManufacturerJohnson Level & Tool #ad
Height8 Inches
Length0.88 Inches
Weight0.3 Pounds
Width10.25 Inches
Part Number1904-0700
Model1904-0700
Warranty1 Year Warranty: Johnson Level warrants this product against defects in material and workmanship for one year after the confirmed purchase date. At its option, the company will replace or repair the product if it fails under normal use.

10. Mr. Pen

#ad

12" Combo Square, Square Tool, Carpenter Square, T Ruler, Framing Square, Combination Square Set, Carpentry Tools, Woodworking Tools, Metal Ruler, Metal Square, T Square, Mr. Pen- Combination Square

#ad
Mr. Pen #ad - 12-inch heavy Duty Combination Square. Combo square with durable and rust-proof stainless Steel Blade Marked with Precise inch and cm Graduation in 1/16, 1/8, and 1/32 Inch. Brass scriber and Level. Accurately measure and Draw 90 Degree And 45 Degree Angles. Spring loaded Brass Bolt to Assure Accuracy.
BrandMr. Pen #ad
ManufacturerMr. Pen #ad
Part Number..
Model..

metal