Top 10 Visual Fault Locator 30MW – Home Improvement

As an Amazon Associate I earn from qualifying purchases.

1. HAYEAR

#ad

HAYEAR Visual Fault Locator Fiber Optic Laser Cable Tester 30mW 27KM

#ad
HAYEAR #ad - Finding the breakpoint, poor connections. Operates either in CW or Pulsed. The 650nm pen-type Visual Fault Finder is specially designed.
BrandHAYEAR #ad
ManufacturerHAYEAR #ad
Height1.5 Inches
Length8 Inches
Weight0.35 Pounds
Width3 Inches
Part NumberLYSB01A804NN6-ELECTRNCS
ModelLYSB01A804NN6-ELECTRNCS

2. Akehaimei

#ad

Fiber Optic Cable Tester pen-type Visual Fault Locator 30mw VFL

#ad
Akehaimei #ad - 5. Storage temperature:-40~+704. Operating temperature:-10~+45. 3. Optical connector:2. 5mm universal connector/For 1. 25mm connectors, fc male-LC Female convertor, can be optional on customer requests. 2. Output power:30mw. 1. Central wavelength:650nm+-10nm.
BrandAkehaimei #ad
ManufacturerAkehaimei #ad
Height2.36 Inches
Length7.09 Inches
Weight0.2 Grams
Width1.18 Inches
Part Numberwwq 47

3. KOMSHINE

#ad

Komshine VFL Fiber Optic Visual Fault Locator Fiber Pen Style 30mW Can Test 30km

#ad
KOMSHINE #ad - Ceramic ferrule/Silicone dust cap. Test distance: 30km. Check the fiber broken or not. Outer power: 30mW. Cw mode & flash mode for your choose.
BrandKOMSHINE #ad
ManufacturerKomshine #ad

4. Jeirdus

#ad

Jeirdus Portable 30mW 30km Visual Fault Locator Fiber Optic Cable Tester Meter Finder Red light laser For Engineering Maintenance

#ad
Jeirdus #ad - Test for both single-mode and multi-mode cables with optional 2. 5mm fiber opticStandard connectors to 1. 25mm adapterOptional. Easy to check fiber faults with visual red laser light, Universally connector for test different ST, SC, FC interfaces.

This 30kw visual fault locator is specially designed for tracing, fiber routing and continuity checking in an optical netwerk during and after installation. High effective power circuits allow for stable laser power, Operates in both CWContinuous wave and pulse mode. With a moderate size: Length: 6. 3in160mm Diameter: 1. 0 in26mm weight: 76g. A aaa-size alkaline batteries provide 15 hours of stable continuous operation. Note:the batteries are not included because of shipping request.
BrandJeirdus #ad
ManufacturerJeirdus #ad
Height0.39 Inches
Length0.39 Inches
Weight0.22 Pounds
Width0.39 Inches
Part NumberFBM-HGB-ST-30
ModelFBM-HGB-ST-30

5. Goeco

#ad

Fiber Optic Cable Tester FC SC & 2.5mm 30mV Visual Fault Locator with Sc,Fc Connector and Shoulder Toolkit

#ad
Goeco #ad - Fiber optic cable tester: it can measure 850/980/1300/1310/1490/1550/1625nm and other 7 wavelength of the optical absolute power, test range:-70dBm~+10dBm. It can easily and accurately detect and locate fiber breaks, bending or cracking.

The detector will emit a 650nm bright red light for fiber tracing, poor connections, breaks or faults in the fiber will refract the light, creating a bright glow around the faulty area. Visual fault locator: 2. 5mm universal connector – the connector of the detector is compatibly designed for ST, SC, FC interferes both in circle and square shape of different fiber optic cables. Any problems please contact us. Linear and non-linear with same display screen, alternatively steady / strobe red light source;work for 40 hours with automatic shutdown.
BrandGoeco #ad
ManufacturerGoeco #ad
Weight0.84 Pounds

6. KOMSHINE

#ad

Newest Fiber Fusion Splicer Machine Komshine GX39 Automatic Splicing Machine Free with Visual Fault Locator 30mw

#ad
KOMSHINE #ad - 002db tipical splicing loss; 025mm/09mm/3. 0mm/ Flat cable. 9 seconds typical splicing time; 10 Languages for the Fusion Splicer. 4000 splices electrode life; Up to 200 times of continuous splices and heat. 20 seconds heating Time with high precision Oven. Three years warranty and whole life technical Support; Ships from USA.
BrandKOMSHINE #ad
ManufacturerKomshine Technologies Limited #ad
Weight33.07 Pounds
ModelGX37+KPM-25+KFL-10
Warranty3 years

7. Mauricio

#ad

Mauricio Fiber Visual Fault Locator 30MW 30KM,VFL Fiber Optic Cable Tester Meter,Red Light Pen Tester Adapt LC///ST Interface

#ad
Mauricio #ad - Practical design with battery, no additional purchase is required. Excellent function the fiber tester has multiple functions including constant output, long battery life, low battery warning, and long-distance detection. Vfl will emit 650 nanometer red light for fiber tracking and positioning. Applicable to: integrated wiring system and optical fiber engineering; CATV engineering optical network maintenance; photoelectric communication; optical measurement drive engineering; optical equipment production and research.

It can run in CW or pulse mode. Small and light, easy to check fiber faults, easy to carry, visual fault location, pen-shaped design with bag, the design uses stainless steel head and aluminum body to prevent collision and dust, and the shell ground design effectively prevents electrostatic discharge damage. Detection distance this visual fault locator has 30mW strong light source output, high-efficiency supply circuit provides stable, constant output, strong red light 20-30 kilometers in the fiber optic cable, continuous wave and pulse mode.

Accurate identification this visual fault locator can easily and accurately detect and locate fiber breaks, poor connections, bends or cracks. Efficient fiber routing and continuity check produce a light in the faulty area. Wide application universal 2. 5mm connectors designed for lc, st,, can interfere with the round and square of different fiber optic cables, and test single-mode and multi-mode cables. Breaks or malfunctions will refract the light in the fiber.
BrandMauricio #ad
ManufacturerMauricio #ad
Height1.57 Inches
Length7.87 Inches
Weight0.32 Pounds
Width2.76 Inches
Part Number500146635

8. N/

#ad

YICIZOL 30km Visual Fault Locator,Optic Fiber Power Meter with FC,SC Connector, Optic Fiber Cleaver and FC/UPCMale to LC/UPCFemale Adapter FTTH Tool Kits for CATV Engineering

#ad
N/ #ad - Vfl the 2. 5mm universal connector of the detector is compatibly designed for ST, SC, FC interferes both in circle and square shape of different fiber optic cables. Test for both single-mode and multi-mode cables. It will help to extend the use of time. Opm 2. 5mm fc/sc/st universal interface, support simultaneous disply of linear mW and non-linear index dBm.

With sc/upcmale to lC/UPCFemale Adapter. Cleaver the fc-6s is ideal for use with fusion splicing or other precision applications, setting a new standard for flexibility and performance. The principle is detector emit a 650nm bright light to tracing, poor connections, breaks or faults points in the fiber will refract the light. 30mw visual fault locator with battery output strong red light goes 20-30 kilomters far, high effective power circuits allows for stable power. Easy to change the ceramic core. And have two mode: always light and flicker.

Opm can measure 7 standdard wavelengths 850/980/1300/1310/1490/ 1550/1625/1650nm, support backlight selection, Support automatic shutdown, support lighting, Support wavelenghth memory function, test range: -70dBm~+6dBm, Support user calibration. It is a simple operation for the user to remove or install the single fiber adapter and alternate between mass and single fiber cleaving. Vfl it is easily to accurately detect and locate fiber breaks, bending or cracking. The fc-6 is available with a single fiber adapter for 250 to 900 micron coated single fibers.
BrandN/ #ad
ManufacturerYICIZOL #ad
Weight0.6 Pounds

9. RUKUN

#ad

30MW Optic Fiber Cable Tester with Male to LC Female Adapter, RUKUN Visual Fault Locator, 30KM Red Light Source Meter

#ad
RUKUN #ad - Widely used2. 5mm universal connector - the connector of the detector is compatibly designed for ST,, interferes both in circle and square shape of different fiber optic cables.

End-to-end fiber recognition. Rugged metal designRugged and weatherproof design with a small bag. Also has pulsed and CW operation. Identify fibersred light cable equipment could also be used to identify the connectors in patch panels and identify the fibers during splicing operation. Long distance detectionthe 30mw visual fault locator has a strong light source output, can output a strong red indicating light, up to 25-35 kilometers. Locating the fault of fiber breakage, winding and so on. Locate breakpointsvisual fault locator, be used to locate sharp bends & breaks in jacked or bare fiber.
BrandRUKUN #ad
ManufacturerRUKUN #ad
Height1.18 Inches
Length7.87 Inches
Weight0.28 Pounds
Width2.76 Inches
Part Number500284275

10. Viupolsor

#ad

Fiber Tester for Fiber Network Cable Test, Viupolsor 2 PC Visual Fault Locator 30MW 30KM,with Single Mode 9/125Um to LC Adapter

#ad
Viupolsor #ad - Our 30mw visual fault locator emit a 650nm red light for fiber tracing, poor connecttions, fiber routing and continuity checking efficiently. Easy identification of fiber breakpoints, bending or cracking. 2. 5mm universal connector - the connector of the detector is compatibly designed for ST,,, LC interferes both in circle and square shape of different fiber optic cables.

Breaks or faults in the fiber will refract the light, creating a glow around the faulty area. Excellent for finding the right fiber to splice or quickly finding a break. The 30mw visual fault locator has a strong light source output, can output a strong red indicating light, up to 20-30 kilometers.

Super light and uses convenient AA battery. The fiber optic tester is perfect for field tests because of its multiple functions such as output, long battery life, low battery warning, multi-interface adaptation, and long-distance detection. It is designed with high quality material to Prevent Crash And Dust, And The Case Ground Design Prevents ESD Damage Efficiently. The high-efficiency supply circuit ensures a stable supply.
BrandViupolsor #ad
ManufacturerViupolsor #ad
Height2.76 Inches
Length7.48 Inches
Weight0.56 Pounds
Width2.76 Inches
Part Number500309129