Category: Uncategorized

Top 10 Woodturning Tool Rest – Power Lathe Accessories

As an Amazon Associate I earn from qualifying purchases.

1. PSI Woodworking

#ad

5/8" Diameter Post 15.875mm, PSI Woodworking CLTEZSETC EZ-Glide Bowl Turner's 4pc Toolrest Set

#ad
PSI Woodworking #ad - Reach far into the interior of bowls with ease; Use for bowl exterior, interior hollowing, deep penetration, and sharp corners. 2-1/2" radius toolrest has 6-1/2" span with 3" post and overall vertical length of 4-1/4"; 2" radius toolrest has 6-3/4" span with 2-1/2" post and overall vertical length of 3-1/2".

Ultra smooth, round hardened steel rod top will let you effortlessly glide your chisel or other lathe tool for superior results; Upper support rod will not nick or scratch. Post on all four toolrests is 5/8" diameter 15. 875mm. S-curve toolrest has 11" span with 3" long post with overall vertical length of 4"; 1-1/2" radius J-curve toolrest has 8" span with 2-3/4" post and overall vertical length of 4-1/4".
BrandPSI Woodworking #ad
ManufacturerPSI Woodworking Products #ad
Height2.55 Inches
Length12.2 Inches
Weight4.35 Pounds
Width5.35 Inches
Part NumberCLTEZSETC
ModelCLTEZSETC
Warranty2 Years Under Normal Use

2. Robert Sorby

#ad

Robert Sorby # 767 9 Inches Long x 3/4 Inch Diameter Internal Tool Rest Cross Bar for Modular Tool Rest System

#ad
Robert Sorby #ad - Modular tool rest system enables the turner to build up a collection of tool rests without going to great expense. Made from precision ground polished and hardened allow steel. Made in england by Robert Sorby. Stems interface with 6 different rests: 4", 6" and 9", internal and external curves and a box platform. 9" long x 3/4" diameter internal tool rest cross bar.
BrandRobert Sorby #ad
ManufacturerRobert Sorby #ad
Weight0.64 Kilograms
Part Number767
Model767

3. PSI Woodworking

#ad

PSI Woodworking CLTSET1 3pc Toolrest Set, 1" Diameter Post 25.4mm

#ad
PSI Woodworking #ad - Includes 1 12" straight with 3/4" diameter bar, 1 5" arc with 1. Check the your lathe's tool rest holder for compatibility; 1" = 25. Heavy duty 3pc tool rest set that enables you to position your chisel close to your work-piece to eliminate vibration while turning. Post on all three tool rests is 1" Diameter 25. 4mm and 5-3/4" Long. 4mm; 984252" = 25mm. 25" x 3/16" bar, and 1 8" arc with 1-1/4" x 3/8" Bar. Great for turning a bowl; inside hollowing and exterior wood removal.
BrandPSI Woodworking #ad
ManufacturerPSI Woodworking #ad
Part NumberCLTSET1
ModelCLTSET1
Warranty2 Years Under Normal Use

4. Robust

#ad

Small"J" Curved Tool Rest, Standard Post, Robust, 9" Wide

#ad
Robust #ad - Small "j" curved rest - 9" wide - 1" Diameter - Standard Post. Robust tool rest are made from solid steel. Fits robust sweet 16, independence, liberty | oneway 2036, 3000 | delta 16 | General 16 |Stubby 750, 2016 | nova dvr, 1000 | Woodfast 16 Lathes. Each tool rest is topped with a hardened steel bar which will not nick, dent and will stay smooth after years of use.
BrandRobust #ad
ManufacturerRobust #ad
Height3 Inches
Length6 Inches
Width9 Inches
Part NumberRTR-09-SJ-SD

5. PSI Woodworking

#ad

PSI Woodworking CLTSET58 Straight Bar 3pc Toolrest Set, 5/8" Diameter Post 15.875mm

#ad
PSI Woodworking #ad - Smooth, dense steel surface allows the tool to glide over the bar for vibration-free turning. Round top bar is also 5/8" diameter. The 3 included toolrests have top bar lengths of 6", 9", and 12". Heavy duty, solid round bar 3pc tool rest set provides ultimate chisel control for lots of different woodturning projects. 875mm and 2-3/4" long. Post on all 3 tool rests is 5/8" diameter 15.
BrandPSI Woodworking #ad
ManufacturerPSI Woodworking #ad
Height0.5 Inches
Length12.5 Inches
Weight3.05 Pounds
Width4.2 Inches
Part NumberCLTSET58
ModelCLTSET58
Warranty2 Years Under Normal Use

6. Robust

#ad

5/8" Post, Tool Rest for Mini Lathes, Robust, 12" Wide

#ad
Robust #ad - Each tool rest is topped with a hardened steel bar which will not nick, dent and will stay smooth after years of use. Tool rest for mini lathes - 12" Wide - 5/8" Post. Robust tool rest are made from solid steel. Fits midi and mini Lathes with 5/8" posts.
BrandRobust #ad
ManufacturerRobust #ad
Height3 Inches
Length6 Inches
Weight3 Pounds
Width12 Inches
Part NumberRTR-12-MN-SD

7. MAYAGU

#ad

11.8 Inch Cast Iron Lathe Tool Rest For Wood Turning Lathe Turning Tool Rest

#ad
MAYAGU #ad - The shank diameter Is 16MM. Tool rest is suitable for 16MM Diameter Tool Rest Base. Material:Cast Iron. Wear-resistant, high hardness, anti-rust, Has A Long Service Life. Made of cast iron, rod Will Not Nick Or Scratch Giving.
BrandMAYAGU #ad
ManufacturerMAYAGU #ad
Part Number16100849b

8. Simple Woodturning Tools

#ad

Detailer & 12" Color Coded Solid Aluminum Lathe Tool Handles, USA Made, Simple Woodturning Tools 3 Carbide Wood Turning Tools with Rougher, Finisher

#ad
Simple Woodturning Tools #ad - No more tool sharpening. Overall turning tool length is 9". These high quality carbide turning tools are American made by Harrison Specialties in Ramsey, Minnesota, a family owned CNC machining and manufacturing company.

Each cnc machined powdercoated turning tool handle is 1-1/8" outside diameter by 12" overall length. Replacing or turning the cutters is easy with the included Torx wrench. Easy tool selection with color coded solid aluminum handles. Designed with a 3/8" square shaft making it easy to keep tools flat on the tool rest. Greatly simplifies woodturning with no need for any sharpening equipment. Carbide turning tools feature ultra-sharp replaceable tips, which have multiple sides that can be rotated.
BrandSimple Woodturning Tools #ad
ManufacturerHarrison Specialties #ad
Weight4 Pounds
Part NumberMSP3 MSR2R Handle 85R, 85BLK, 85SAP

9. Woodcut Tools

#ad

Woodcut Tools Irons Tool Gate Rest for Hollowing Woodturning Tools TG

#ad
Woodcut Tools #ad - Our money back guarantee - we consistently get feedback from customers who have found the quality and performance of our products have exceeded expectations, we offer a no questions asked 30 Day Money Back Guarantee. Designed to securely hold tools from 1/2" to 1". There is a choice of six different gate positions.

Hollowing of forms up to 19" deep have been achieved with the Irons Tool Gate. This rest can even be rotated and positioned into your vessel enabling deeper hollowing and reducing the, usually, unsupported length of your hollowing tool inside your hollow form. Give our irons tool gate a go today, but in case you don't agree, absolutely risk free! Tool post required - a tool post is required for use of the irons tool gate. User guide and demonstration videos are available on our You Tube channel. User guides & videos supplied - an extensive user guide booklet is included in the box with your Irons Tool Gate.

Woodcut tools has a range of tool post sizes available sold separately on Amazon. Total control & versatility - preventing your tool slipping sideways and allowing the turner to guide the tool into the turning smoothly and accurately for more controlled cutting. This is sold separately as each lathe has a different size tool post. Please note we have been informed the Nova tool post in "frequently bought together" does not work with this.
BrandWoodcut Tools #ad
ManufacturerWoodcut Tools #ad

10. Robust

#ad

Standard Post, Low Profile Tool Rest, Robust, 4" Wide

#ad
Robust #ad - Fits robust sweet 16, independence, 2016 | nova dvr, 3000 | delta 16 | General 16 |Stubby 750, liberty | oneway 2036, 1000 | Woodfast 16 Lathes. Each tool rest is topped with a hardened steel bar which will not nick, dent and will stay smooth after years of use. Low profile rest - 4" wide - 1" Diameter - Standard Post. Robust tool rest are made from solid steel.
BrandRobust #ad
ManufacturerRobust #ad
Height3 Inches
Length6 Inches
Width4 Inches
Part NumberRTR-04-LP-SD

metal