As an Amazon Associate I earn from qualifying purchases.
1. LASCO #ad
LASCO 05-1713 150 PSI Pressure Relief Valve with 3/4-Inch Pipe Thread #adLASCO #ad
- Bronze body. 3/4-inch male thread. Pressure only relieve valve. Designed for protection against excessive pressure only. 150 psi pressure rating.
|Warranty||1 Year Warranty|
2. Unknown #ad
Camco 10471/10473 3/4" Temperature and Pressure Relief Valve with 4" Epoxy-Coated Probe #adUnknown #ad
- 4" probe. 3/4" npt connection. Factory set at 150 PSI and 210F. Listed to ansi Z21. 22. Brass body with stainless spring.
3. Rheem #ad
Rheem SP12574 Temperature and Pressure Relief Valve,Small #adRheem #ad
- For best results, use only Rheem replacement parts for repairing your Rheem Water Heater. Maximum temperature setting deg. Kits which contain this part: 45W613.
F: 210, 000, csa capacity btu/hr: 105, maximum pressure setting psi: 150, Inlet Thread Size - NPT in.3/4. Outlet thread size - npt in. 3/4, overall length in. 7-1/4, body Length in. 3-1/4, sensor Length in. 4.
4. Rheem #ad
Small, Rheem Temperature and Pressure Relief Valve SP8346 #adRheem #ad
- For best results, use only Rheem replacement parts for repairing your Rheem Water Heater. Kits which contain this part: 45W510, SP13266. Outlet thread size - npt in.
3/4, overall length in. 7-1/4, body Length in. 4-1/4, sensor Length in. 3. F: 210, 000, csa capacity btu/hr: 105, maximum pressure setting psi: 150, Inlet Thread Size - NPT in.3/4. Maximum temperature setting deg.
5. Circrane #ad
NPT Thread & Lead-free Brass, Circrane 3/4 Inch IPS Isolator Tankless Water Heater Service Valve Kit with Pressure Relief Valve #adCircrane #ad
- The tankless kit works with all 3/4 inch npt thread is suitable for most U. S. Hi-flow hose drains 500 wog & pressure relief valve 150 PSI/ 200, 000 BTU; Full port brass ball valves with adjustable packing gland.
If you encounter any problems in the process of using our products, please contact us, our team will solve any problems when you meet them in time. Integrated drain valve with brass safety cap for easily maintenance.
3/4 inch isolation kit involves hot and cold valves 500wog with 1/4 red and blue handles for easy identification and use. One-piece forged brass body effectively prevents any leakage or dripping.
Equipped with full port ball valve for better flow rate. The main isolation valve set is factory tested to be leak-free so that your heater can be maintained periodically during each flushing sequence. This complete kit made from lead free brass for years of usage. Residential usage, rinnai, both residential and commercial gas tankless water heater brand such as Noritz, Takagi, Rheem, Navien and so on.
6. Unknown #ad
Camco 10423 1/2" Temperature and Pressure Relief Valve with 4" Epoxy-Coated Probe #adUnknown #ad
- Protects water heaters from excessive water temperatures and pressure. Csa certified. 1/2" - 14 npt male inlet; 1/2" - 14 npT female outlet with 4" probe. Resistant to corrosion. Factory preset to 150 psi and 210 degrees Fahrenheit.
7. Water Source #ad
Water Source Llc Rv50-nl 1/2-Inch Pressure Relief Valve No Lead 75 PSI #adWater Source #ad
- Starts to relieve pressure at 75 PSI. Heavy brass with stainless steel control springs. 1/2 in. Not for use with water heaters. Fits 1/2 in. Solid-brass design meets federal low lead regulations. Pipe. Discharge port. Protects tank systems From Excess Pressure Build Up.
8. Watts #ad
LF100XL-DP-TT-150, Watts 3/4" Lead Free Temperature and Pressure Relief Valve #adWatts #ad
- Self-closing safety valve for hot water heaters. 3/4-inch mpt male pipe thread inlet and female outlet. 150 psi maximum. 3/4-inch valve body length, 1-1/8-Inch long shank. Provides the least expensive and proven means for protection.
|Part Number||3/4 LF100XL-DP-TT-150|
|Warranty||1-Year Manufacturer Limited|