As an Amazon Associate I earn from qualifying purchases.
1. LASCO #ad
LASCO 05-1713 150 PSI Pressure Relief Valve with 3/4-Inch Pipe Thread #adLASCO #ad
- Bronze body. 3/4-inch male thread. Pressure only relieve valve. 150 psi pressure rating. Designed for protection against excessive pressure only.
|Warranty||1 Year Warranty|
2. Unknown #ad
Camco 10471/10473 3/4" Temperature and Pressure Relief Valve with 4" Epoxy-Coated Probe #adUnknown #ad
- Factory set at 150 PSI and 210F. Listed to ansi Z21. 22. Brass body with stainless spring. 3/4" npt connection. 4" probe.
3. Rheem #ad
Rheem SP12574 Temperature and Pressure Relief Valve,Small #adRheem #ad
- For best results, use only Rheem replacement parts for repairing your Rheem Water Heater. Kits which contain this part: 45W613. Outlet thread size - npt in.
3/4, body length in. 3-1/4, overall Length in. 7-1/4, sensor Length in. 4. F: 210, 000, csa capacity btu/hr: 105, maximum pressure setting psi: 150, Inlet Thread Size - NPT in.3/4. Maximum temperature setting deg.
4. Rheem #ad
Rheem Temperature and Pressure Relief Valve SP8346, Small #adRheem #ad
- Maximum temperature setting deg. F: 210, csa capacity btu/hr: 105, maximum pressure setting psi: 150, 000, Inlet Thread Size - NPT in.3/4. Kits which contain this part: 45W510, SP13266.
For best results, use only Rheem replacement parts for repairing your Rheem Water Heater. Outlet thread size - npt in. 3/4, body length in. 4-1/4, overall Length in. 7-1/4, sensor Length in. 3.
5. Circrane #ad
Circrane 3/4 Inch IPS Isolator Tankless Water Heater Service Valve Kit with Pressure Relief Valve, NPT Thread & Lead-free Brass #adCircrane #ad
- If you encounter any problems in the process of using our products, please contact us, our team will solve any problems when you meet them in time. The tankless kit works with all 3/4 inch npt thread is suitable for most U.
S. This complete kit made from lead free brass for years of usage. Hi-flow hose drains 500 wog & pressure relief valve 150 PSI/ 200, 000 BTU; Full port brass ball valves with adjustable packing gland.
The main isolation valve set is factory tested to be leak-free so that your heater can be maintained periodically during each flushing sequence. Integrated drain valve with brass safety cap for easily maintenance.
One-piece forged brass body effectively prevents any leakage or dripping. 3/4 inch isolation kit involves hot and cold valves 500wog with 1/4 red and blue handles for easy identification and use. Equipped with full port ball valve for better flow rate. Residential usage, takagi, rinnai, both residential and commercial gas tankless water heater brand such as Noritz, Rheem, Navien and so on.
6. Unknown #ad
Camco 10423 1/2" Temperature and Pressure Relief Valve with 4" Epoxy-Coated Probe #adUnknown #ad
- Protects water heaters from excessive water temperatures and pressure. Resistant to corrosion. Csa certified. Factory preset to 150 psi and 210 degrees Fahrenheit. 1/2" - 14 npt male inlet; 1/2" - 14 npT female outlet with 4" probe.
7. Water Source #ad
Water Source Llc Rv50-nl 1/2-Inch Pressure Relief Valve No Lead 75 PSI #adWater Source #ad
- Fits 1/2 in. Discharge port. Pipe. Heavy brass with stainless steel control springs. Not for use with water heaters. Protects tank systems From Excess Pressure Build Up. Starts to relieve pressure at 75 PSI. Solid-brass design meets federal low lead regulations. 1/2 in.
8. Watts #ad
Watts 3/4" Lead Free Temperature and Pressure Relief Valve, LF100XL-DP-TT-150 #adWatts #ad
- 3/4-inch mpt male pipe thread inlet and female outlet. 3/4-inch valve body length, 1-1/8-Inch long shank. Self-closing safety valve for hot water heaters. 150 psi maximum. Provides the least expensive and proven means for protection.
|Part Number||3/4 LF100XL-DP-TT-150|
|Warranty||1-Year Manufacturer Limited|