As an Amazon Associate I earn from qualifying purchases.

1. LASCO

#ad

LASCO 05-1713 150 PSI Pressure Relief Valve with 3/4-Inch Pipe Thread

#adLASCO #ad - Bronze body. Pressure only relieve valve. 3/4-inch male thread. Designed for protection against excessive pressure only. 150 psi pressure rating.

Brand	LASCO #ad
Manufacturer	LASCO #ad
Height	3.3 Inches
Length	1.5 Inches
Width	1.85 Inches
Part Number	05-1713
Model	05-1713
Warranty	1 Year Warranty

2. Unknown

#ad

Camco 10471/10473 3/4" Temperature and Pressure Relief Valve with 4" Epoxy-Coated Probe

#adUnknown #ad - 4" probe. 3/4" npt connection. Listed to ansi Z21. 22. Factory set at 150 PSI and 210F. Brass body with stainless spring.

Brand	Unknown #ad
Manufacturer	Camco #ad
Height	11.38 Inches
Length	1.5 Inches
Weight	0.45 Pounds
Width	3.63 Inches
Part Number	10473
Model	10473

3. Rheem

#ad

Rheem SP12574 Temperature and Pressure Relief Valve,Small

#adRheem #ad - F: 210, 000, maximum pressure setting psi: 150, csa capacity btu/hr: 105, Inlet Thread Size - NPT in.3/4. Outlet thread size - npt in. 3/4, body length in. 3-1/4, overall Length in. 7-1/4, sensor Length in. 4. For best results, use only Rheem replacement parts for repairing your Rheem Water Heater. Maximum temperature setting deg. Kits which contain this part: 45W613.

Brand	Rheem #ad
Manufacturer	Rheem #ad
Height	0.2 Inches
Length	1 Inches
Weight	0.7 Pounds
Width	1.2 Inches
Part Number	SP12574
Model	SP12574

4. Rheem

#ad

Rheem Temperature and Pressure Relief Valve SP8346, Small

#adRheem #ad - Kits which contain this part: 45W510, SP13266. F: 210, csa capacity btu/hr: 105, maximum pressure setting psi: 150, 000, Inlet Thread Size - NPT in.3/4. Outlet thread size - npt in. 3/4, overall length in. 7-1/4, body Length in. 4-1/4, sensor Length in. 3. Maximum temperature setting deg. For best results, use only Rheem replacement parts for repairing your Rheem Water Heater.

Brand	Rheem #ad
Manufacturer	Rheem #ad
Height	0.2 Inches
Length	1 Inches
Weight	0.65 Pounds
Width	1.2 Inches
Part Number	SP8346
Model	SP8346

5. Circrane

#ad

Circrane 3/4 Inch IPS Isolator Tankless Water Heater Service Valve Kit with Pressure Relief Valve, NPT Thread & Lead-free Brass

#adCircrane #ad - One-piece forged brass body effectively prevents any leakage or dripping. Equipped with full port ball valve for better flow rate. The tankless kit works with all 3/4 inch npt thread is suitable for most U. S.

Hi-flow hose drains 500 wog & pressure relief valve 150 PSI/ 200, 000 BTU; Full port brass ball valves with adjustable packing gland. This complete kit made from lead free brass for years of usage. If you encounter any problems in the process of using our products, please contact us, our team will solve any problems when you meet them in time. Integrated drain valve with brass safety cap for easily maintenance.

The main isolation valve set is factory tested to be leak-free so that your heater can be maintained periodically during each flushing sequence. 3/4 inch isolation kit involves hot and cold valves 500wog with 1/4 red and blue handles for easy identification and use. Residential usage, rinnai, both residential and commercial gas tankless water heater brand such as Noritz, Takagi, Rheem, Navien and so on.

Brand	Circrane #ad
Manufacturer	Circrane #ad

6. Unknown

#ad

Camco 10423 1/2" Temperature and Pressure Relief Valve with 4" Epoxy-Coated Probe

#adUnknown #ad - Factory preset to 150 psi and 210 degrees Fahrenheit. Protects water heaters from excessive water temperatures and pressure. Csa certified. 1/2" - 14 npt male inlet; 1/2" - 14 npT female outlet with 4" probe. Resistant to corrosion.

Brand	Unknown #ad
Manufacturer	Camco #ad
Height	1.6 Inches
Length	11.38 Inches
Weight	0.5 Pounds
Width	3.63 Inches
Part Number	10423
Model	10423

7. Water Source

#ad

Water Source Llc Rv50-nl 1/2-Inch Pressure Relief Valve No Lead 75 PSI

#adWater Source #ad - Solid-brass design meets federal low lead regulations. Starts to relieve pressure at 75 PSI. Fits 1/2 in. Protects tank systems From Excess Pressure Build Up. Heavy brass with stainless steel control springs. Pipe. Discharge port. Not for use with water heaters. 1/2 in.

Brand	Water Source #ad
Manufacturer	Standard Plumbing Supply #ad
Height	1.18 Inches
Length	2.58 Inches
Weight	0.35 Pounds
Width	1.5 Inches
Part Number	RV50-NL
Model	RV50-NL

8. Watts

#ad

Watts 3/4" Lead Free Temperature and Pressure Relief Valve, LF100XL-DP-TT-150

#adWatts #ad - 150 psi maximum. Self-closing safety valve for hot water heaters. 3/4-inch valve body length, 1-1/8-Inch long shank. Provides the least expensive and proven means for protection. 3/4-inch mpt male pipe thread inlet and female outlet.

Brand	Watts #ad
Manufacturer	Watts #ad
Height	10.5 Inches
Length	4 Inches
Width	0.75 Inches
Part Number	3/4 LF100XL-DP-TT-150
Model	3/4 LF100XL-DP-TT-150
Warranty	1-Year Manufacturer Limited