As an Amazon Associate I earn from qualifying purchases.
1. Milescraft #ad
Milescraft 1318 Drillmate Drill Guide with chuck #adMilescraft #ad
- Attaches to all 3/8" and 1/2" power drills and it also includes a 3/8" Capacity chuck with key. Angle cuts of 45 degree to 90 degrees, with a built in angle read out in the all metal base.
Perfect for straight or angled drilling, drilling on the edge of a board or on round stock. Centering channels built into the bottom of the base, to accommodate drilling any round stock up to 3 inches in diameter. Adjustable depth stop and spring action control of the head.
|Manufacturer||Milescraft Inc. #ad|
2. Wolfcraft #ad
Wolfcraft 4525404 Multi-Angle Drill Guide Attachment For 1/4In. & 3/8In. Drills,Silver #adWolfcraft #ad
- Guide-bars themselves have springs for a quick return when doing repetitive drilling. Fits all 1/4-inch or 3/8-inch drills. Angle positions can go up to 45 degrees, and rubber pads in the base hold the guide in place.
Drill adapter itself slides up and down on guide-bars. Drill guide that can be used in horizontal, vertical or angle positions.
3. Milescraft #ad
Milescraft 1312 DrillBlock- Handheld Drill Guide #adMilescraft #ad
- Centerlines ensure accurate alignment when drilling into various surfaces. Non-slip feet holds the Drillblock in place while preventing both slipping and marring on wooden work pieces.
Package dimensions:3. 05"l x 5. 33"w x 14. 48"h. The two product v-grooves allow for usage on corners and even cylindrical surfaces too.
|Manufacturer||Milescraft Inc. #ad|
4. DCT #ad
Locating Pin, DCT SAE Drill Bit Guide Centering Punch 8-pc Center Drilling Set Kit – 3/16 to 1/2in Bushings, Guide #adDCT #ad
- Quickly find center: drop the included locating center punch pin inside the 3/16-inch bushing one way fit – flat top of pin first into bottom of bushing – do not attempt pointed tip end into bushing and then center over the spot to drill; To find the center line on an edge, place 2 small nails not included in drill guide holes and turn drill guide so each nail touches opposite side of the wood.
Drill any shape board: drill perfectly straight holes through even the thickest board no matter what the shape of the piece being drilled; Drill on sides, and cylinders; For spheres, edges, spheres, use disc-shaped recess on bottom of drill guide; For cylinders and edges especially drilling pipe and dowels, use V-shaped groove on bottom of drill guide to position drill guide.
Contents: package includes 1 guide, 1 locating pin, and 6 standard drill bushings for your convenience. Variety of sae sizes: standard sae drill bushing sizes include 3/16”, 3/8”, 7/16”, 1/4”, 5/16”, and 1/2” inch; Each drill bushing has permanently laser-etched size markings for quick identification.
Precise drill guide: use the dct standard sae drill bit guide set to accurately locate exact drilling centers and guide drill bits perfectly perpendicular to the woodworking piece on flat, spherical, round, and corner edges; Economical drill press substitute with top quality and precision not a clamp or vise substitute; Additionally use as a quick and accurate dowel drilling guide for edge joining.
|Warranty||This product has a manufacturer warranty against defects in materials and workmanship for a period of ONE (1) YEAR from the date of original retail purchase. See our Seller Return Policy for more details.|
5. Zerodis #ad
Dowel Drill Press Guide Jig,6/7/8/9/10mm Drill Bushings Vertical Hole Woodworking for Electric Power Hand Drill Blue #adZerodis #ad
- Practical woodworking ToolThe hole jig is a great tool set for both furniture factory and woodworking enthusiasts. Accurate drillingcenterlines ensure accurate alignment when drilling into various surfaces.
By holding the drill guide body, easy to get vertical hole drilled without any deviation. Aluminium alloythe drill guide is made of premium aluminium alloy, it is of strong strength and long durability.
Drill guide body + 5 drill bushingsthe drill guide jig has 5 drill bushings and their diameters are 6mm, 032, 10mm/024, 028, 035, 9mm, 7mm, 8mm, 0.39inch respectively. It is rather easy to change the bushing thread into the drill guide jig. Drill guide jig for vertical hole DrillingThis is a set of drill guide tools for the fixation and centering while drilling and woodworking.
6. AIBER #ad
6/7/8/9/10mm Woodworking Tool Drill Guide Vertical Drilling Fixture #adAIBER #ad
- Net weight: about 100g. High-quality material: this drill guide woodworking tool made of Aluminum alloy 6061 anodized surface -- Aluminum alloy has strong structure, high hardness and long service life.
Function:centerlines ensure accurate alignment when drilling into various surfaces. It is wear-resistant, rust-proof, durable.
Packing included:1 x main body drill guide, 1 x 10mm drill bushing, 1 x 6mm Drill bushing, 1 x 9mm drill bushing, 1 x 7mm Drill bushing, 1 x 8mm Drill bushing, 2 x Allen keys. Easy to use:centerlines ensure accurate alignment when drilling into various surfaces. Dimensions:main body drill guideapprox. 80x54mm/3. 14x2. 13".
7. Kings County Tools #ad
Kings County Tool Portable Drill Guide Jig | Convert Hand Drill to Drill Press | Bore Up To 45-Degree Angles | 3/8-Inch Shaft and Chuck | 5-Degree Increments | Depth Stop Included #adKings County Tools #ad
- Boring, in a good way - angle boring up to 45-degrees is easily controlled and moved in 5-degree increments. Precise use – a reliable depth stop is included to ensure each task goes as expected. Just use your drill – a hand-held drill now gets the control of a drill press with this steel and plastic jig.
Add to tool chest – this drill guide makes a great addition to any tool chest and is portable for when necessary. Standard size - 3/8" shaft and chuck are used for this quick tool conversion while it works smooth with no wobble.
8. Drill Master #ad
ANGLE DRILL GUIDE from 45° to 90° with 5° increments angle settings #adDrill Master #ad
- Guide your 3/8" or 1/2" drill at any angle from 45° to 90° with total accuracy. Positive-stop depth control. 3/8" keyless chuck. Spring return keeps guide in ready position. Capacity: 3" round stock, 4" x 4" square stock, 4" x 7" rectangular stock.
|Brand||Drill Master #ad|
9. Big Gator Tools #ad
Big Gator Tools MDG1000NP V-Drill Guide #adBig Gator Tools #ad
- Heat-treated nickel alloy steel provides durability & accuracy. Universal & portable v-Drill guide provides perpendicular alignment of drill bits on flat, round or square materials.
Precision ground base provides perpendicular alignment of drill bit on flat surfaces. Includes 17 metric drill sizes: 3mm, 9mm, 6. 8mm, 7. 5mm, 3. 3mm, 7mm, 6mm, 5.5mm, 3. 5mm, 8mm, 8. 5mm, 4. 2mm, 4. 5mm, 5mm, 6. 5mm, 4mm, 9. 5mm.
|Brand||Big Gator Tools #ad|
|Manufacturer||Big Gator Tools #ad|
|Warranty||Lifetime warranty does not cover abuse|