As an Amazon Associate I earn from qualifying purchases.
Fosmon #ad - Great for lighting remotely turn your indoor and outdoor lighting ON/OFF. Convenient conveniently turn your outside lights on from indoors or turn on hard to reach switches with the click of a remote.
Limited lifetime warranty includes a Limited Lifetime Warranty. The wavepoint remote control outlet comes with pair and un-pair technology.
Ortis #ad - Adopting ul-certified american Standard 14AWG power cord which allowable passage with a large current more than 30A. Max motor rating should not exceed 120v/15A 50/60Hz, Routers, Table Saws, Joiners, 1875W. Configurable actuation threshold: 30w/60w, you can select flexibly appropriate actuation threshold according to your actual condition.
Compatibility: supports a wide range of cutting tools from rotary handheld devices to large shop saws such as Miter Saws, Power Sanders, Planers etc. New generation: addition of two tool outlets, each key for corresponding option, no need extra extension socket, Off and On; The values are clearly displayed with LED indicators, avoid messy cords and save time; Three vacuum run modes can be switch freely: Auto, easier to check and set.
Configurable shutoff delay time: automatically delays vacuum turn-off by an optional time 3s/7s/10s to continue clearing the remaining airborne debris after the tool has stopped, which reducing work area noise and improve work efficiency. Turn on delay & safety: automatic delays 1s to turn on the vacuum when you start your tool, which avoids circuit overload or tripping. Prevent vacuum from running too long or being unable to shut off after tool has stopped.
iVAC #ad - If your dust collector is 2 hp or more, please contact ivac technical Support at 8007755579 ext. 4 for advice before you buy! There are other options to automate your system.
iVAC #ad - Turn off delay ensures that your work area continues to be cleared of remaining airborne debris. Turn on delay avoids the two power surges occurring at the same time. 2640 total watts two input power cords permit operation from two separately protected circuits.
PSI Woodworking #ad - Includes: receiver, hand control, 9V battery. 50 foot range; 5 foot cord on receiver module; requires 9V battery included. 5hp. Save yourself the inconvenience of walking over to turn on your dust Collector while you're in the middle of a critical project; simply press the transmitter on/off button to easily switch your dust Collector on or off.
Ortis #ad - Max motor rating should not exceed 120v/15a 50/60Hz, Routers, Power Sanders, Table Saws, 1875W. Configurable actuation threshold: 30w/60w, you can select flexibly appropriate actuation threshold according to your actual condition. Adopting ul-certified american Standard 14AWG power cord which allowable passage with a large current more than 30A.
Compatibility: supports a wide range of cutting tools from rotary handheld devices to large shop saws such as Miter Saws, Joiners, Planers etc. New generation: addition of two tool outlets, each key for corresponding option, off and on; the values are clearly displayed with LED indicators, avoid messy cords and save time; Three vacuum run modes can be switch freely: Auto, no need extra extension socket, easier to check and set.
Turn on delay & safety: automatic delays 1s to turn on the vacuum when you start your tool, covered with PC+ABS V0 grade flame retardant material, which avoids circuit overload or tripping. Configurable shutoff delay time: automatically delays vacuum turn-off by an optional time 3s/7s/10s to continue clearing the remaining airborne debris after the tool has stopped, which reducing work area noise and improve work efficiency. Thick copper core, less heat during use and extend service life.
iVAC #ad - Developed especially for ivac's pro switch system, the Pro Remote works with an iVAC Pro Switch module to turn your dust collector on or off, whether used with or without a iVAC Pro Tool module. 40 ft range.
1. Fosmon
#adFosmon WavePoint Wireless Remote Control Outdoor Electrical Outlet Switch Weatherproof Heavy Duty 3-Prong Plug-in ETL Listed Battery Included 1 Pack
#adLimited lifetime warranty includes a Limited Lifetime Warranty. The wavepoint remote control outlet comes with pair and un-pair technology.
More information #ad
Weather resistant durable, weather resistant construction for outdoor use. Multiple uses tvs, heaters, terrariums, sprinkler systems, lighting, humidifiers, shop vac power tool, aquariums, dust collector. It will give you the freedom to choose or change the control setup any time you like.| Brand | Fosmon #ad |
| Manufacturer | Fosmon #ad |
| Height | 1.8 Inches |
| Length | 4 Inches |
| Width | 7.2 Inches |
| Part Number | C-10683 |
| Model | C-10683 |
More information #ad
2. Ortis
#adAutomatic Vacuum Switch with Extra Outlet for Using More Power Tools, Adjustable Actuation Threshold, Yellow, Ortis Dust Control Autoswitch Delay Vacuum On/Off to Prevent Circuit Overload and Tripping
#adCompatibility: supports a wide range of cutting tools from rotary handheld devices to large shop saws such as Miter Saws, Power Sanders, Planers etc. New generation: addition of two tool outlets, each key for corresponding option, no need extra extension socket, Off and On; The values are clearly displayed with LED indicators, avoid messy cords and save time; Three vacuum run modes can be switch freely: Auto, easier to check and set.
More information #ad
Thick copper core, covered with PC+ABS V0 grade flame retardant material, less heat during use and extend service life. Configurable shutoff delay time: automatically delays vacuum turn-off by an optional time 3s/7s/10s to continue clearing the remaining airborne debris after the tool has stopped, which reducing work area noise and improve work efficiency. Turn on delay & safety: automatic delays 1s to turn on the vacuum when you start your tool, which avoids circuit overload or tripping. Prevent vacuum from running too long or being unable to shut off after tool has stopped.
| Brand | Ortis #ad |
| Manufacturer | Ortis #ad |
| Height | 3 Inches |
| Length | 5 Inches |
| Width | 4 Inches |
| Part Number | HVC-03Y |
More information #ad
3. iVAC
#adIVAC Pro Switch 240 Volt with Remote for Dust Collectors
#adMore information #ad
| Brand | iVAC #ad |
| Manufacturer | BCTINT Limited #ad |
| Height | 2.5 Inches |
| Length | 10.6 Inches |
| Width | 7.8 Inches |
| Part Number | RS24020NA |
| Model | RS24020NA |
More information #ad
4. iVAC
#adAutomated Vacuum Switch
#adMore information #ad
No venting holes the ivac's internal components are designed to generate very little heat. Dust collector / shop vacuum up to 1HP or 5 Peak HP. Modes of operation: auto, off and on.| Brand | iVAC #ad |
| Manufacturer | BCTINT Ltd #ad |
| Height | 2.2 Inches |
| Length | 10.8 Inches |
| Weight | 1.5 Pounds |
| Width | 7.8 Inches |
| Part Number | 10031-010 |
| Model | 10031-010 |
More information #ad
5. PSI Woodworking
#adPSI Woodworking LR110-3 Long Ranger III 110V Remote Dust Collector Starter Switch
#adMore information #ad
Input voltage 110-125 volts ac; maximum 16 amps; maximum horsepower 1. Fcc approved; rf signal goes through walls with no outside interference: Unlimited programmable frequencies; Extra Hand Controls available LRTM-3.| Brand | PSI Woodworking #ad |
| Manufacturer | PSI Woodworking #ad |
| Part Number | LR110-3 |
| Model | LR110-3 |
| Warranty | 2 Years Under Normal Use |
More information #ad
6. Ortis
#adAutomatic Vacuum Switch, Ortis Dust Control Autoswitch for More Power Tools, Adjustable Actuation Threshold, Delay Vacuum On/Off to Prevent Circuit Overload and Tripping
#adCompatibility: supports a wide range of cutting tools from rotary handheld devices to large shop saws such as Miter Saws, Joiners, Planers etc. New generation: addition of two tool outlets, each key for corresponding option, off and on; the values are clearly displayed with LED indicators, avoid messy cords and save time; Three vacuum run modes can be switch freely: Auto, no need extra extension socket, easier to check and set.
More information #ad
Prevent vacuum from running too long or being unable to shut off after tool has stopped. Turn on delay & safety: automatic delays 1s to turn on the vacuum when you start your tool, covered with PC+ABS V0 grade flame retardant material, which avoids circuit overload or tripping. Configurable shutoff delay time: automatically delays vacuum turn-off by an optional time 3s/7s/10s to continue clearing the remaining airborne debris after the tool has stopped, which reducing work area noise and improve work efficiency. Thick copper core, less heat during use and extend service life.
| Brand | Ortis #ad |
| Manufacturer | Ortis #ad |
| Part Number | hvc-03 |
More information #ad
7. iVAC
#adIVAC Pro Dust Collection Remote Control
#adMore information #ad
Remote can be programmed to operate any combination of up to 8 tools and one dust collector, or up to 4 dust collectors in one shop. Colored in high visibility yellow and has a convenient belt clip for keeping it close around the shop. Uses two cR2032 batteries. Fcc and ic certified.| Brand | iVAC #ad |
| Manufacturer | iVAC #ad |
| Height | 5.91 Inches |
| Length | 4.72 Inches |
| Weight | 0.1 Pounds |
| Width | 1.57 Inches |
| Part Number | R115240NA |
| Model | R115240NA |
More information #ad
